New Product: MiniSampler & ProfiSampler I from Dynalab

With the MiniSampler and ProfiSampler the sample liquid only comes into contact with the suction hose and the sample bottle. The possibility of cross-contamination is greatly reduced therefore. Immediately after having taken the sample, the bottles are sealed using an airtight cap and with tamper-evident safety ring seal. The single-use, flexible, suction hose can be quickly replaced, thus ensuring that the samples are never contaminated. If necessary, a new hose can be used for every single sample. Due to its small diameter (5/16” / 8mm) and flexibility the hose can reach sampling areas which are otherwise inaccessible.

Three models are available

• MiniSampler PE for general sampling, max. suction lift 5 m*
• MiniSampler PTFE for ultra-pure sampling, max. suction lift 5 m*
• ProfiSampler PP for industrial use, max. suction lift 6 m*
  *depending on medium

Also suitable for viscous oils
Complete in a practical transport case
Not for aggressive acids. Vapors could damage pump.

Operation

1. Place hose and bottle in pump.
2. Insert hose end to desired sample depth.
3. Move the pump piston back and forth and collect the sample. The liquid flows directly into the bottle.
4. Take off the filled bottles, close and label them.