New Product: Parr Instrument Company Fluidized Bed Reactors

Fluidized Bed Reactors fluidized bed reactor The Parr Instrument Company Fluidized Bed Reactor features the Reactor, a Heated Cyclone Separator, a Cooling Condenser, and a 600 mL Product Receiver. Parr Fluidized Bed Reactors are used extensively in the chemical process industries. The distinguishing feature of a fluidized bed reactor is that the solids bed or catalytic particles are supported by an up flow of gas. This reactor provides easy loading and removing of catalyst. This is advantageous when the solids bed must be removed and replaced frequently. A high conversion with a large throughput is possible with this style of reactor. Such reactors inherently possess excellent heat transfer and mixing characteristics.

The reactor system pictured on this page includes the following key components:

• A gas handling and mixing sub-system used to blend and regulate the flow of reactant gas to the bottom of the reactor.
• The reactor is roughly one meter long with a 2.5 cm ID. The lower portion of the reactor incorporates an easily replaced porous metal gas diffusion plate and the top of the reactor widens abruptly to form a disengaging zone for the fluidized bed. Separate heaters are provided for both the main reactor and disengaging zone. A multipoint thermocouple is provided for monitoring the internal reactor temperature distribution.
• A heated cyclone separator or filter is provided immediately downstream of the reactor to capture the fines resulting from particle attrition.
• The reaction products are then cooled by a condenser and collected in a 600 mL product receiver.
• The system pressure is maintained by a dome loaded back pressure regulator.
• All system functions and parameters are monitored and maintained by a Parr 4871 Process Controller (not shown).