New Product: Caleva Model 10 ST Dissolution Tester

Caleva Dissolution Tester Model 10 ST For Sale.

The Caleva Dissolution Tester 10 ST is already in use at many pharmaceutical plants world-wide and offers state of the art functions and technology. This unit is designed for manual sampling only and cannot be upgraded for automation (see 10+ST).

Test parameters are entered via the numeric membrane keypad. All data and test parameters are displayed on the illuminated 4-line LCD. The 10 ST has a one-piece molded PET water bath (1000 ml version only) and separate powerful flow-through heating system, in order to prevent vibration. The USP/EP glass vessels (8) with 1000 or 2000 ml volume are centered automatically and are covered by membrane sealed vessel covers which ensure very low evaporation.

Height adjustment of the stirrers (6, 7 or 8 as required) is also automatic. Due to the separable shafts and stirring elements, one stirrer (e.g. paddle) can be unscrewed from the shaft and replaced by another one (e.g. basket). In addition the 10 ST offers an acoustic and optical (count-down) manual sampling reminder, USP/EP compliant start routine for baskets, one point calibration for the electronic temperature sensor with documentation protocol.

Options available are UV-resistant vessels, certified and/or gold-plated stirring elements, intrinsic dissolution kit, enhancer cell, etc. There is no RS 232 serial interface for external control by the CALEVA Windows based dissolution software package to build up offline and online dissolution system. Also the USP/EP compliant automated sample withdrawal and replacement system and electronic temperature sensors for each vessel, as well as the upgraded electronics to control a complete online dissolution system including sample transfer pump and fraction collector are NOT available for this unit. For all of the above options please see the 10+ST.

Features

• • 8 USP/EP glass vessels, 1000 ml or 2000 ml.
• • Membrane sealed “low evaporation” vessel covers.
• • Automatic vessel centering.
• • 6, 7 or 8 test stations (stirrers).
• • 8 USP/EP stainless steel shafts and paddles.
• • Wobble < 0.3mm at delivery (Paddle).
• • Electronic telescopic lifter.
• • No height adjustment required for stirrers.
• • USP/EP compliant start routine.
• • Interchangeable shafts.
• • One-piece molded PET water bath.
• • External 2000 watt flow-through heating system, accuracy ± 0.20C, heating
• • Time approximately 15 mins.
• • Electronic PT 100 temperature sensor with one-point calibration and
• • Calibration protocol.
• • Reminder (optic and acoustic) for sampling intervals.
• • Numeric membrane keypad and illuminated 4-line LCD.
• • Serial connector for printer connection.

More info about the Caleva Model 10 ST Dissolution Tester For Sale