AH Systems Broadband Current Probes Split Type

Ad Description

AH Systems Broadband Current Probes For Sale. Split Type Clamp on Design.

Small and lightweight, each Current Probe is manufactured to exacting standards, thus ensuring repeatable performance.

Conducted currents can be measured without making direct contact with the source conductor or metallic surface by means of clamp-on broadband current probes. The BCP-5xx EMC Current Probes are designed to permit field intensity meters, spectrum analyzers, and other 50W impedance instruments to measure quantitative magnitudes of current. Measurements can be made on single and multi-conductor cables, ground and bonding straps, shielded conduits and on coaxial cables.

Model	Frequency Range	Transfer Impedance (dB ohms)	Max Cont. Current (Amps)	Aperture (in.)	Diam. (in.)
BCP-510	20 Hz - 1 MHz	-56 to -30	100	1.2	3.9
BCP-511	20 KHz - 100 MHz	-12 to +1	350	1.2	3.9
BCP-512	1 MHz - 1 GHz	0 to 24	200	1.2	2.8
BCP-514	10 KHz - 100 MHz	-18 to 0	350	2.7	5.0
BCP-515	1 MHz - 400 MHz	-14 to 19	300	1.2	2.8
BCP-516	10 KHz - 50 MHz	-7 to 12	800	1.2	3.7
BCP-518	100 KHz - 500 MHz	-10 to 15	200	2.7	5.0
BCP-519	100 Hz - 100 MHz	-40 to 17	200	2.6	5.5
BCP-520	10 KHz - 500 MHz	-25 to 20	350	1.2	3.9
BCP-522	1 KHz - 200 MHz	-30 to 0	100	1.2	2.8
BCP-526	100 KHz - 1 GHz	-38 to -15	200	1.2	2.8

Injection Current Probes

Injection Current Probes are used to inductively couple large RF currents into conductors passing through their aperture. The conductors are signal, control and power circuits of equipment under test for conducted susceptibility or immunity.

Typical specifications requiring the use of injection probes are:
· DO-160
· EN-50081-1
· IEC 801-6
· TR-EOP-000063

Model	Frequency Range	Insertion Loss (dB)	Max Cont. Input Power (Watts)	Aperture	Diam.
ICP-521	10 KHz - 100 MHz	12 to 38	100	1.6" (40 mm)	5" (127 mm)
ICP-522	1 MHz - 400 MHz	4 to 22	200	1.6" (40 mm)	5" (127 mm)
ICP-523	300 KHz - 1000 MHz	4 to 16	100	1.6" (40 mm)	5" (127 mm)

Current Probe Fixtures

The A.H. Systems' line of Current Probe Calibration Fixtures are a great way to keep your broadband Current Probes, and Injection Current Probes calibrated and up to date. Their rugged design ensures long life, and faultless operation over the wide calibration frequency range of 10 kHz to 1000 MHz.

Current Probe Fixtures
CPF-530	10 KHz - 400 MHz	Calibration Fixture
CPF-531	1 MHz - 1000 MHz	Calibration Fixture
CPF-532	10 KHz - 400 MHz	Calibration Fixture, Oversize

A H Systems is a LabX Sponsor.
Please visit their website at: http://www.ahsystems.com

Other Items Available From This Seller...			See All
A.H. Systems - Innovation, Quality, Performance	A.H. Systems For All Your Antenna Test Equipment Needs	A. H. Systems PAM-0126 Broadband Preamplifier	A. H. Systems SAS-512F-2 Folding Log Periodic Antenna 190 MHz – 2 GHz	A.H. Systems SAS-572 High Gain Horn Antenna

Share:

New Product: AH Systems Broadband Current Probes Split Type

Ad Description

AH Systems Broadband Current Probes For Sale. Split Type Clamp on Design.