Midmark/Ritter M7 Speedclave - Autoclave Sterilizer 

Great Refurbished  M7 Speedclave. Not only are we willing to stand behind it with a 90 day warranty, this unit fully meets the approval of our trained and certified technician. He has inspected this autoclave from the inside and out, then calibrated and spore tested to manufacturer's specifications. It comes with the operators manual, a large and small tray, and 5 free spore indicator strips.

Whats In the Box?

* Refurbished M7 sterilizer
* 2 trays
* 5 integrator spore test strips
* Power cord
* User manual

 

* Only 9 1/2 minutes from a cold    start, hot start 6 1/2 minutes. * No plumbing is required, has its    own reservoir for distilled or    demineralized water. * All controls on the front. * Low water cut-out switch prevents    “dry burning” * Reset button saves time * Safety door automatically seals    when pressurized and will not open    until chamber is depressurized.

Dimensions, Weight, Power Requirements: * Overall dimensions    (18.12"x13.56"x12.81") * Chamber (7.5"x15") * Capacity (2.4 gallons) * unit weight (30 lbs) * Electrical (120V, 60Hz)

This autoclave has been through our standard restoration process as follows:

1. Clean reservoir tank by flushing
2. Clean interior of door cover
3. Install new heating element
4. Install new OT thermostat
5. Clean bottom plate, install
6. Install new bellows
7. Install new safety valve
8. Calibrate temp/pressure to factory specifications with factory calibration equipment
9. Replace high pressure hose
10. Replace chamber filter
11. Install new door
12. Run Speedclean cycle to demineralize internal tubing and components as per factory specifications
13. Run spore test
14. Check reservoir tank
15. Continue to test over and over to insure quality