Brabender - Manufacturer Listings

Please select a listing from those listed below.

  1. Brabender Viskograph-E
  2. Used C.W. Brabender Lab Extruder
  3. Roll breaker "sedimat mill". Type SI 12 No. 12044. Roll sizes dia. 70x35mm. Fluted rolls. Motor. Without quarantee.
  4. Brabender Viscosimeter PLE 330. Variable Speed 5-250 rpm. With Recorder. 2x Kneader. Jacket. Mounted on frame. Switchgear. Floorspace 1,4x0,8m. Height 1,6m. Without guarantee.
  5. Brabender Viscosimeter Type PLE 331. Electric capacity 3,3KW Speed 5-120 rpm. 3x Kneader. Jacket. Mounted on frame. Switchgear. Height 1,6m. Weight 370kg. without guarantee!
  6. Brabender Viscosimeter Plast-Corder PLE-651. Torque Rheometer. Variable speed 5-120 rpm. 7 interchangable measuring heads. Without guarantee.
  7. " Used Brabender wire coating line, type 05-85-PO3 Special, with 8"" wide unwind / 5"" wide x 5"" deep x 60"" long stainless steel through, 10"" roll face width x 3"" diameter rubber pull rol
  8. " Used Brabender prep-center, type D-3A/5-5V3M, 1.5 HP DC motor with SCR controller, serial# 56-65 with type CEO-6 mixing head with jacket, serial# GT65758 with type T-3000 Thermotron heater.


    Please call (888) 433-5771 or email us usin
  9. " Used Brabender wire coating line, with 10"" roll face width x 3"" diameter rubber top roll x 10.5"" roll face width x 3"" diameter bottom roll pull roll stand with winder station with 2.25"" cone, 1/
  10. Used Brabender Plasticorder, type EPL-V5S02, drive with 2 HP motor, REE-6 mixing head, jacketed with 4 zone control panel, T300 Thermotron heater, serial# 0126S.


    Please call (888) 433-5771 or email us using the form below.
  11. Used C.W. Brabender Extruder, 3/4"", 15:1 L/D, Type 150, S/N 1497, Model PLV/50 Drive, 1.5 H.P., 1/60/230V, Serial No. 2718/66, with Plasticorder.


    Please call (888) 433-5771 or email us using the form below.
  12. " Used Brabender Plasti-Corder Model PLUV/150AA, 1 1/2 H.P. drive, 230 V, complete with Model Roller 5-G575 measuring head, controls and hot oil unit, temperature range up to 300 degrees C, Serial No. 2577.


    Please call (888) 433-5771 o
  13. Used Brabender 3/4"" Lab Extruder 20:1 L/D with Plastograph, .75 H.P. 3/60/220V DC motor drive, on base.


    Please call (888) 433-5771 or email us using the form below.
  14. Used Brabender Prep Center, Model FT2-187, stainless steel Sigma Blade Mixer, Jacketed, 1750-860 RPM, 1/8-1/16 H.P., 110 volt.


    Please call (888) 433-5771 or email us using the form below.
  15. " Used Brabender Plasticorder with mixing head, .8 H.P. drive, complete on base with measuring head, Type Cam, Model GT-295/S.B., Plasticorder Model PLMV100, 230 volt, 3 phase, 60 cycle, complete with self contained oil heater.


    Please
  16. " Used Brabender Plasticorder, Model EPLV-3301, 3 H.P. 230 Volt DC Drive, Serial No. 01365, Type SP-IIIP400 Controller, Serial No. 1208, and REE6/2H Mixer attachment with ram, Serial No. AA425SB, AS IS.


    Please call (888) 433-5771 or em
  17. " Used Brabender Prep Center with Model D-7502, 7.5 HP 230 Volt DC motor with SCR Controller drive, model 2523, 3/4"" single screw extruder, 25:1 L/D, serial no. 1008, 11"" wide puller/film stand with extension, 2"" pelle
  18. " Used 2"" Brabender volumetric feeder, model DSR-AT, stainless steel construction, agitated lump breaker hopper with approx. 1/4 HP DC motor, 2"" diameter x 16"" long screw driven by 1/2 HP DC motor with hopper, serial#
  19. Used Brabender vibratory gravametric loss-in-weight feeder, model HO-DSR-28, stainless stee contact surfaces, serial# C1629.


    Please call (888) 433-5771 or email us using the form below.
  20. " Used Brabender Plasticorder, Type EPL-V501, Troque Rheometer, with 5 H.P. 230 volt motor with controls, Serial No. 041, Type 230V11AMP Mixing Head, less blades, Serial No. 0093, Type 2503 Extruder, 3/4"" diameter, 25:1 L/D, electrically he


How can LabX serve you better? Click here and tell us!


Nov 20, 2008. Copyright © 1995-2008 LabX.com All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.
Use of this Web site constitutes acceptance of the LabX User Agreement.

MNX11 WXX47 DEX20