CREPACO - Manufacturer Listings

Please select a listing from those listed below.

1. "THREE (3) Used 2HD672 Crepaco CP Rota-Pro Swept Surface Heat Exchangers (Votators), 316 stainless steel, all sanitary construction, each unit consists of two 6"" diameter x 72"" long tubes, jacketed for 150 PSI, insulated, with se
2. " Used Model 3DD25 Crepaco Multi-Flow Homogenizer stainless steel clad construction, sanitary product contact parts, rated 125 GPM minimum @ 3500 PSI to 500 GPM @ 2000 PSI, single stage homogenizing valve assembly manually controlled, keyed cylinder d
3. "1-USED CREPACO MODEL L-3 INGREDIENT FEEDER, SERIAL #C-8345. WITH STAINLESS STEEL VERTICAL TUBE, WITH INTERNAL FLIGHTS DRIVEN BY 1/3HP MOTOR AND POSITIVE DISPLACEMENT PUMP, DRIVEN BY 3/4HP MOTOR, WITH 1-1/2"" DIAMETER DISCHARGES, SIDE AND BO
4. 1-USED CREPACO MODEL 4RX STAINLESS STEEL POSITIVE DISPLACEMENT PUMP, S/N 18958. EQUIPPED WITH APPROX. 3"" DIAMETER INLET AND OUTLET PORTS. DRIVEN BY REEVES 5 HP 3/60/230-460 VOLT VARIABLE SPEED MOTOR. ON BASE.
5. 1-USED CREPACO STAINLESS STEEL ROTARY POSITIVE DISPLACEMENT PUMP S/N D-8294. EQUIPPED WITH APPROXIMATELY 3 INCH DIAMETER INLET AND OUTLET PORTS. ON COMMON BASE WITH VARIABLE SPEED DRIVE, 3/60/230-460 VOLT.
6. Crepaco Deaerator Tank
7. Crepaco Plate Heat Exchanger - 208.63 sq. ft.
8. Crepaco CR5 Plate Heat Exchanger - 1337 sq. ft.
9. Crepaco R3R Positive Displacement Pump
10. Crepaco Rota-Pro Swept Surface Heat Exchanger
11. APV Crepaco Positive Displacement Pump
12. Crepaco Stainless Steel Deaerator- 250 Gallon
13. APV Crepaco Stainless Steel Holding Tank and Pump – 300 Gallons
14. Crepaco Centrifugal Pump
15. Crepaco Rota-Pro Swept Surface Heat Exchanger
16. Crepaco Deaerator Tank
17. Crepaco Rota-Pro Swept Surface Heat Exchanger
18. Crepaco Size 2 Positive Displacement Pump
19. APV / Crepaco R series Positive Displacement Pump
20. Crepaco Pump
21. Crepaco Pump Drive
22. Crepaco Meat Pump
23. " Used 150 gallon Crepaco kettle, 304 stainless steel construction, 52"" diameter x 16"" straight side x 28"" cone bottom, dish top, jacketed for 75 PSI, stainless steel skin over jacket, single motion Anchor agitator wit
24. "1-USED CREPACO 200 GALLON STAINLESS STEEL JACKETED ""LIQUIVERTER"" PROCESS MIXER/BLENDER, S/N D0169. JACKET RATED 150 PSI @ 350 DEGREES F AND INTERNAL RATING OF 25 PSI @ 350 DEGREES F, NATIONAL BOARD NUMBER 5514, CODE STAMPED. MUL
25. "1-USED CREPACO 200 GALLON STAINLESS STEEL JACKETED ""LIQUIVERTER"" PROCESS MIXER/BLENDER, S/N D0169. JACKET RATED 150 PSI @ 350 DEGREES F AND INTERNAL RATING OF 25 PSI @ 350 DEGREES F, NATIONAL BOARD NUMBER 5514, CODE STAMPED. MUL
26. Crepaco Ammonia Oil Separator Tanks- 45 Gallon
27. Crepaco Positive Displacement Pump