Custom - Manufacturer Listings

Please select a listing from those listed below.

  1. High Temperature Electric Box Furnaces to 1700 C
  2. Custom Electronic Testing Equipment
  3. Custom Noise Tester Electronic Bearing Torque Noise Tester
  4. Custom Testing Apparatus in 19" Rack
  5. Custom 101192-0027 Omni Cap
  6. Custom 101193-0002 Stainless Hi Vac Chamber Base Plate w/Cold Finger
  7. Custom 15x17x24 Chemical Resistant Container w/Wheels - 6 Slot
  8. Custom 9x16x23 Chemical Resistant Container w/Wheels - 6 Slot
  9. Custom Chemical Transport Cart
  10. Custom Conveyor Laminator Motor Driven Conveyor/Laminator System
  11. Custom Fixture Tolerance Measurement Fixture
  12. Custom Flange Gasket 9"
  13. Custom Flange Gasket Heavy Duty 8 3/16"
  14. Custom Lever Component For Wafer Bonder Assembly
  15. Custom M31460 Static Electrical Tester
  16. Custom NL Base Unit on Marble Slab ~!~
  17. Custom Pneumatic Precision Device
  18. Custom Pneumatic Precision Device W/ Analog Controller
  19. Custom Pneumatic Precision Device
  20. Custom Pneumatic Assembly
  21. Custom Pneumatic Press Assembly
  22. Custom Pneumatic Assembly with Transducer
  23. Custom Pneumatic Assembly chassis
  24. Custom Pneumatic Bonder Assembly Component
  25. Custom Portable Pneumatic Press w/ Ultramotion Linear Thruster
  26. Custom Probe Assembly w/ Rucker and Kolls p/n: 110-134
  27. Custom Scientific Apparatus 4 Experimenter Hobby Jigs
  28. Custom Scientific Assembly Component
  29. Custom Scientific Assembly Component
  30. Custom Stage Controller Unit
  31. Custom Wafer Bonder Assembly Component
  32. Custom Dual Inlet Vacuum / Pressurized Flow Device
  33. Custom Parts Lot for Processing Equipment
  34. Custom Controller.
  35. Custom Lens.
  36. Custom Comparative Comparison Microscope - 20X W.F E.P with Crosshair
  37. Custom NL Counter
  38. Custom 30 x 25 mm Linear Slide Stage
  39. Custom 7.5" Glass Vacuum Test Chamber for Wobble Stick
  40. Custom ABEX-685-FF-SEC Brake Pad
  41. Custom Calibration Fixture
  42. Custom MRLOB02 Bulk Fill Control In Enclosure
  43. Custom Power Conditioner W/ Emergency Cutoff Button
  44. Custom 9-105-0314 Lenses in Holder
  45. Custom Optical Apparatus w/ Moveable Lens
  46. Custom Red Vertical Adjustment Piece
  47. Custom Slide Duplication Machine w/ Nikkor 63mm f/6.3
  48. Custom Designed Ball Bearing Rework Unit Sizes .079 .080 .081 .082
  49. Custom Linear bearings Apparatus
  50. Custom N /A Stainless Steel Tick Mark
  51. Custom N /A Stainless Steel Rotating Stage
  52. Custom none Pneumatic X Axis Work Table
  53. Custom X-Y Electro magnet fixture
  54. Custom 19" Rackmount Enclosure w/ 2 Jennings com RJ2C-26S Vacuum Relays
  55. Custom Pneumatic Linear Slide Apparatus
  56. Custom Heating Mantle.
  57. Custom Cylinder Bracket.
  58. Custom Cylinder Bracket.
  59. Custom Lit Stage Assembly
  60. Custom 16x20x25 Table.
  61. Custom 18x21x16 Table.
  62. Custom 3064Z Black Tower, 120GB, DVDRW
  63. Custom 1.859 Band Pass Filters
  64. Custom 16.0 MHz Bessel Filter 5 pole
  65. Custom 20 MHz Bessel Filter 5 pole
  66. Custom 4.0 MHz Bessel Filter 5 pole
  67. Custom 5.5 MHz Bessel Filter 5 pole
  68. Custom 6.0 MHz Bessel Filter 5 pole
  69. Custom 6.7 MHz Butterworth Filter 3 Pole
  70. Custom 6.8 MHz Bessel Filter 5 pole
  71. Custom 7.5 MHz Bessel Filter 5 pole
  72. Custom 8.0 MHz Bessel Filter 5 pole
  73. Custom 9.0 MHz Bessel Filter 5 pole
  74. Custom 9.5 MHz Bessel Filter 5 pole
  75. Custom 1 KV DC Blocking Capacitors
  76. Custom Stainless Sector Cap w/6 Coaxial Feed Throughs SMA
  77. Custom Bypass Unit Portable 3-Channel Unit for Microwave Receiver for Mobile Phone
  78. Custom 122mm Flange High Vacuum Fitting Chamber
  79. Custom custom Stainless steel vacuum pipe
  80. Custom Designed Electro Pneumatic Punch
  81. Custom Vintage Computer Card
  82. Custom Adjustable Pneumatic Apparatus
  83. Custom Heat Sealing Machine w/ Omega CN4400 Temperature Controller
  84. Custom Compressed Gas Regulator.
  85. Custom Temperature Regulated Chemical Tank With Pump
  86. Custom N /A 4 Valve Chill Water Manifold 1" x 4 -1/2" Branches
  87. Custom N /A 4 Valve Chill Water Manifold
  88. CUSTOM TRANSIT CASE
  89. Custom Sputtering Chamber Au Gold 12.75 Inch Dia 9.75 Inch High TurboVac 151
  90. Custom CTTS-4313/RHM Portable Collimation Tower Test Set
  91. Custom Pc2A 94V-0 4299 Fiber Channel Kit
  92. Custom Stainless Vacuum Manifold
  93. Custom Process Equipment Thermal Micro Bonder
  94. Glass reactor system, Variable speed drive ( Fincor 2300 dC motor cont
  95. PowerStat Controller, Dual System 10 amps per side.
  96. Custom Peristaltic Pump. Baldor DC 90 Volt motor, with Masterflex 7017
  97. Used 10"" Custom Pelletizer, 3 knife rotor with bolt on removable knives, pull roll assembly with 3 H.P.
    208-220/440 Volt XP Motor.


    Please call (888) 433-5771 or email us using the form below.
  98. Used Custom Dual Rotor Fly Knife Cutter, twin single bladed cutting heads, 5"" to 20"" long cut lengths, 1 H.P. DC Motor with SCR.


    Please call (888) 433-5771 or email us using the form below.
  99. Used Custom Fly Knife Cutter, dual blade rotor, 1.5"" diameter die opening, adjustable pull rolls, with variable speed drive, durrant solid state 100 controller.


    Please call (888) 433-5771 or email us using the form below.


How can LabX serve you better? Click here and tell us!


Dec 02, 2008. Copyright © 1995-2008 LabX.com All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.
Use of this Web site constitutes acceptance of the LabX User Agreement.

MNX12 WXX49 DEX2