DAY - Manufacturer Listings

Please select a listing from those listed below.

1. " Used Day Ribbon Blender, 36 cu. ft. working capacity, stainless steel construction, 30"" wide x 78"" long trough, double ribbon, 6"" center bottom outlet, short stands, outboard roller bearings packing glands, complete
2. " Used Day 10"" x 22"" High Speed Three Roll Mill, hydraulic roll adjustments, adjustable brass end guides and apron discharge, water cooled rolls, complete with 30 H.P.
   Louis Allis Drive, 550 volt, on floor mounting base.
3. " Used Day Stainless Steel Ribbon Blender, approx. 36 cu. ft. working capacity, double ribbon, center bottom outlet, packing glands, outboard roller bearings, split cover, complete on legs with 10 H.P. gearhead motor drive, approx. 30"" wide
4. " Used Day Double Ribbon Blender, 36 cu. ft.
   working capacity, carbon steel construction, 30"" wide x 78"" long trough, double ribbon, outboard sleeve bearings, packing glands, 4"" center bottom outlet with manual s
5. " Used Day Ribbon Blender, stainless steel construction, 23 cu. ft. working capacity, 26"" wide x 66"" long trough, double ribbon with end scrapers, 4"" center bottom outlet with manual slide gate valve, packing glands, o
6. " Used Day Double Arm Mixer, Model 300C, 300 gallon working capacity, carbon steel construction, jacketed trough and ends, tangential sigma blades, motorized tilt with drive, on base with 40 H.P. gear head drive, chain and sprocket driven, 220/440 vol
7. " Used Day Double Arm Mixer, Model 300C, 300 gallon working capacity, carbon steel construction, jacketed trough and ends, tangential sigma blades, motorized tilt with drive, on base with 40 H.P. gear head drive, chain and sprocket driven, 220/440 vol
8. " Used Day Ribbon Blender, 36 cu. ft. working capacity, stainless steel construction, 30"" wide x 76"" long trough, outboard roller bearings, packing glands, chain and sprocket driven with 10 H.P., 220/440 motor drive, full covers,
9. " Used Day 2.5 gallon Double Arm Mixer, stainless steel construction, heavy duty mogel design, tangential 135 degrees spiral blades, removable blades jacketed bowl, tilting bowl with cylinder, 7.5 H.P. variable speed drive, 220/440 volt, on base.
   
10. " Used Day Ribbon Blender, 17 cu. ft. working capacity, stainless steel construction, 24"" wide x 60"" long trough, double ribbon, 4"" center bottom outlet with manually operated flush type plug valve, packing glands, jac
11. " Used Day Ribbon Blender, 155 cu. ft. working capacity, Model 50X10, C/S Construction, 50"" wide x 10 long trough, double ribbon, outboard roller bearings, packing glands, jacket trough, rated 15 PSI @ 250 degrees F, 30 H.P.
    gear head
12. " Used Readco Ribbon Blender, 170 cu. ft. working capacity, carbon steel construction, 48"" wide x 12 long trough, double ribbon, jacketed trough, rated 15 PSI at 300 degrees F, outboard roller bearings, packing glands, 25 H.P. 220/440 volt
13. " Used Readco Ribbon Blender, 144 cu. ft. working capacity, carbon steel construction, 44"" wide x 12 long trough, double ribbon, jacketed trough, rated 15 PSI @ 300 degrees F, outboard roller bearings, packing glands, 30 H.P. gear head moto
14. " Used Day Ribbon Blender, 96 cu. ft. working capacity, carbon steel construction, 42"" wide x 10 long trough, double ribbon, outboard roller bearings, packing glands, jacket trough, 8"" center bottom outlet, on legs, with 36"
15. " Used 200 gallon Day Double Arm Mixer, 304L stainless steel construction, tangential sigma blades, jacketed bowl rated 125 PSI @ 353 degrees F, hydraulic tilt with 5 H.P.
    power pack, on base with 100 H.P. 440 volt motor, bowl dimensions: 50
16. " Used 200 gallon Day Double Arm Mixer, 304L stainless steel construction, tangential sigma blades, jacketed bowl rated 125 PSI @ 353 degrees F, hydraulic tilt with 7.5 H.P.
    power pack, on base with 100 H.P. 480 volt motor, bowl dimensions: 50
17. " Used 200 gallon Day Double Arm Mixer, 304L stainless steel construction, tangential sigma blades, jacketed bowl rated 125 PSI @ 353 degrees F, hydraulic tilt with 5 H.P.
    power pack, on base with 100 H.P. 480 volt motor, bowl dimensions: 50
18. " Used Day Mixtruder, 100 gallon total capacity, 50 gallon working capacity, carbon steel construction, tangential sigma blades driven by 25 H.P. 230/460 volt motor, discharge screw driven by approx. 10 H.P. motor, 9"" diameter x 48"
19. " Used 150 gallon Day Double Arm Mixer, 316 stainless steel construction, overlapping sigma blades, 44"" L-R x 35.5"" F-B x 31"" deep bowl with 5"" top bowl extension, 150 gallon working capacity, 225 gallon tot
20. " Used Day ribbon blender, 36 cu ft working capacity, stainless steel construction, 30"" wide x 78"" long trough, double ribbon, 4"" bottom end discharge, packing glands outboard roller bearings, 15 HP 230/460 volt motor,
21. " Used 100 Cu. Ft. Day Ribbon Blender, stainless steel construction, 40"" wide X 120"" long trough, double ribbon, jacketed trough rated 40 PSI @ 267 degrees F, outboard roller bearings, center bottom outlet with rotary air lock, o
22. " Used 14"" X 30"" Day Three Roll Mill, 14"" diameter X 30"" long rolls, cored rolls, manually adjusted first and third rolls, knife discharge, end guides for first and second rolls, with motor drive.
    
    <
23. " Used 5"" X 12"" Day Three Roll Mill, 5"" diameter X 12"" faced rolls, cored rolls, hydraulically adjusted first and third rolls, brass end guides, knife discharge, on base with explosion proof motor, Serial No
24. " Used 10 Cu. Ft. Day Ribbon Blender, stainless steel construction, 21"" wide X 48"" long trough, heavy duty constuction, rated 5 PSI internal, double ribbon, outboard roller bearings, hinged top cover, 6"" side bottom ou
25. " Used Day Three Roll Mill, 14"" diameter x 30"" long rolls, cored rolls, manually adjusted first and third rolls, brass end guides, knife discharge, on base with motor, Serial No. 74880.
    
    
    Please call (888) 433-5771
26. " Used Model 100 Daymax Mixer, carbon steel construction, 100 gallon working capacity, 30"" diameter x 30"" deep chamber, jacketed, 25 H.P. 230/460 volt XP motor, (1) baffle, four blade rotor, 20"" top opening with hinged
27. " Used 36 cu. ft. Day Sanitary Ribbon Blender, all solid stainless steel construction including trough, ribbon, covers, legs, and seals, 30"" wide x 78"" long trough, double ribbon, air purge sanitary split seals, outboard roller b
28. " Used 50 cu. ft. Day Ribbon Blender, stainless steel construction, 36"" wide x 96"" long trough, double ribbon, outboard roller bearings, jacketed trough, 10"" bottom end discharge, chain and sprocket driven with 10 HP 2
29. " Used Day Double Arm Mixer, 4 gallon total, 1.5 gallon working capacity, 304 stainless steel construction, Tangential Sigma blades, jacketed for 125 PSI @ 353 degrees F, full vacuum internal, hydraulic tilting bowl, on base with 3 HP 230/460 Volt Ree
30. Used 50 GAL DAY DOUBLE ARM MIXER, SIGMA BLADES, JKTD
    
    Please call (888) 433-5771 or email us using the form below.
31. " Used 21 cu. ft. Day Nauta Mixer, Model MD2X-210, carbon steel construction, dual screw design with cored shaft for liquid injection, complete with 7 1/2 H.P. motor drive for screw, 2 H.P. motor drive for orbit arm, Serial No. 87389. New 1974.
    
32. " Used 52.5 cu. ft. Day Nauta Mixer-Dryer, carbon steel construction, Model MBX525, rated full vacuum internal @ 353 degrees F, dimple jacketed for 125 PSI @ 360 degrees F, with 10 H.P. screw drive, XP, 3/60/230-460 volt, 2 H.P. orbit arm drive, XP, 3
33. " Used Day Co. Turbulent Mixer/Processor, Size 70, 70.6 cu. ft., 528 gallon total capacity, (similar to Littleford FKM2000E), stainless steel construction, jacketed shell, (2) 20 H.P. explosion proof choppers, 75 H.P. main drive, on stand with center
34. " Used Day Double Arm Mixer, 350 gallon working capacity, 697 gallon total capacity, 66"" left to right x 48"" front to back bowl, jacketed for 80 PSI working pressure, overlapping sigma blades, rated for up to 100 H.P. drive, 30 R
35. " Used Day Co. Nauta Mixer, Model D105, 10.6 cu. ft. working capacity, stainless steel construction, 3 H.P. motor drive, explosion proof, 64 RPM on the screw, 2.2 RPM on the orbit arm, pipe coil jacket on the shell, complete.
    
    
    Please ca
36. Used Day (Hobart Style) Dough Mixer, 2 H.P. motor 3/60/220-440 V, 1725 RPM, stainless steel shaft and blade, less bowl, complete with controls, Serial No. 34497.
    
    
    Please call (888) 433-5771 or email us using the form below.
37. " Used Day Nauta Mixer, Model MBX-1760, 304L Stainless Steel Construction, 176 cu. ft. (1316.5 gallons) working capacity, 15 H.P. drive on the screw, 2 H.P. drive on the orbit arm, 3.27 RPM on the orbit arm, 95 RPM screw speed. O.A.D. 96""
38. " Used 5"" x 12"" Day Three Roll Mill, 5"" diameter x 12"" L rolls, cored rolls, adjustable first and third rolls, manual roll adjustment, complete on stand with 2 H.P. drive, 3/60/220-440V, Serial No. 81113. A
39. " Used J. H. Day ""Daymax"" Mixer, Model 10, stainless steel construction, 10 gallon working capacity, 15 gallon full capacity, 18"" diameter x 24"" deep chamber, 10 HP, vacuum cover, jacket rated 14.9 PSI 129 d
40. "TWO (2) Used 10.6 cu. ft. Day Nauta Mixers, Model D105, 10.6 cu. ft. working capacity, stainless steel construction, with 3 H.P. motor drive, 64 RPM screw, 2.2 RPM orbit arm. Machine has dual slide gate discharge, valves and is mounted on legs. Ser
41. " Used 80 gallon J. H. Day Pony Mixer, hand tilt, carbon steel construction, 34"" diameter x 24"" straight side carbon steel mixing can, flat cover with 6"" wide x 18"" long top filling port, 7.5 H.P., 208-220/4
42. " Used 14 x 30 Day Three Roll Mill, 14"" diameter x 30"" long rolls, cored rolls, micrometer roll adjustments on first and third rolls, for first and second rolls, complete with 30 H.P. 230/460 volts drive, 1170 RPM, knife discharg
43. " Used Day Double Arm Mixer, 300 gallon working capacity, stainless steel construction, jacketed trough, motorized tilt, complete with 40 H.P. gear head motor drives, will take up to 100 H.P., chain and sprocket driven on base, tangential sigma blades
44. "THREE (3) Used Day Double Arm Mixers, Model 300C, 300 gallon working capacity, 500 gallon total capacity, 304 stainless steel construction, jacketed trough for 80 PSI, tangential sigma blades, tilting bowl with hydraulic unit, designed for up to 100
45. " Used 155 cu. ft. Day Ribbon Blender, stainless steel construction, 50"" wide x 120"" long trough, double ribbon outboard roller bearings with air purge seals, 15 PSI jacketed trough, 8"" center bottm outlet with hand op
46. " Used Day Double Arm Mixer, 150 gallon working capacity, stainless steel construction, tangential sigma blades, jacketed bowl rated for 100 PSI @ 338 degrees F, hydraulic tilting bowl with additional dual bottom slide gate valve discharge, hydraulica
47. " Used J. H. Day Nauta Mixer/Vacuum Dryer, Model MBX2470, 247 cu. ft. working capacity, 304 stainless steel construction, dimple jacketed for 125 PSI @ 353 degrees F, 50 H.P. screw drive, 7.5 H.P. orbit arm drive, 230/460 volt, (3) 10 H.P. 230/460 vol
48. " Used 62 cu. ft. Day ribbon blender, stainless steel construction, 36"" wide x 96"" long through, double ribbon, outboard roller bearings, packing glands, 6"" bottom discharge with manual butterfly valve, hinged cover, c
49. "1-USED DAY ""NAUTA"" APPROXIMATELY 1-3/4 CU.FT. WORKING CAPACITY STAINLESS STEEL ""MINI-MIXER"", SERIAL #89817 (#89475A). EQUIPPED WITH DIMPLE JACKET RATED AT 125 PSI @ 353 DEG.F., NATIONAL BOARD #1670, CODE ST
50. 1-USED DAY 25 GALLON STAINLESS STEEL ""PONY"" MIXER, MODEL 2A, S/N 82225. EQUIPPED WITH STAINLESS STEEL CHANGE CAN MEASURING APPROX. 24"" WIDE X 16"" DEEP. MIXER DRIVEN BY 5 HP 3/60/208 VOLT ELECTRIC MOTOR. WITH INTE
51. 1-USED DAY SIZE 3 ""PONY"" 50 GALLON STAINLESS STEEL PLANETARY MIXER, SERIAL #8105. STAINLESS STEEL CHANGE CAN MEASURES APPROX. 28"" DIAMETER X 20"" DEEP AND IS DRIVEN BY 5HP/2.5HP 3/60/220 VOLT TWO SPEED MOTOR. LAST
52. "1-USED DAY MODEL D-10 36 CU.FT. STAINLESS STEEL DOUBLE RIBBON BLENDER, S/N 89280A. TANK DIMENSIONS APPROX. 30"" WIDE X 78"" LONG, BLENDER IS DRIVEN BY 15 HP 3/60/208-230-460 VOLT TEFC GEAR MOTOR. EQUIPPED WITH CENTER BOTTOM DISCHA
53. "1-USED DAY FINISHER/DELUMPER, SERIAL #85005. STAINLESS STEEL CONTACT PARTS. DESIGNED TO DELUMP, AERATE OR FLUFF PRODUCTS PRIOR TO PACKAGING OPERATION. ALSO USEFUL FOR PRODUCTS THAT TEND TO AGGLOMERATE. INTERNAL WORKING ELEMENTS ARE (2) STAINLESS STEE
54. " Used Day Ribbon Blender, stainless steel construction, 18"" wide x 39"" long trough, Double Ribbon, jacketed trough, outboard roller bearings, packing glands, 3"" center bottom outlet with manual slide gate valve, chain
55. " Used 150 gallon Day double arm mixer, stainless steel construction, 225 gallon total capacity, 150 gallon working capacity, jacketed bowl rated 100 PSI @ 338 F, tangential sigma blades, bottom auger discharge with approx 5"" x 16"
56. " Used 150 gallon Day double arm mixer, stainless steel construction, 225 gallon total capacity, 150 gallon working capacity, jacketed bowl rated 100 PSI @ 338 F, tangential sigma blades, bottom auger discharge with approx.
    5"" x 16
57. " Used 150 gallon Day double arm mixer, stainless steel construction, 225 gallon total capacity, 150 gallon working capacity, jacketed bowl rated 100 PSI @ 338 F, tangential sigma blades, bottom auger discharge with approx.
    5"" x 16
58. " Used 150 gallon Day double arm mixer, stainless steel construction, 225 gallon total capacity, 150 gallon working capacity, jacketed bowl rated 100 PSI @ 338 F, tangential sigma blades, bottom auger discharge with approx.
    5"" x 16