Littleford - Manufacturer Listings

Please select a listing from those listed below.

  1. Littleford DVT600 Plow Mixer Dryer 316 Stainless
  2. Used Littleford VT-3000-D Vacuum Mixer / Dryer.
  3. Littleford Plough Share blender
  4. " Used Littleford Lodige Mixer, Model FKM300-D, stainless steel construction, 9.9 cu. ft. total capacity, 6 cu. ft. working capacity, (1) 10 HP high speed chopper, bolt on plows, standard side access doors, manually operated flush type discharge, on s
  5. " Used Littleford Lodige lab mixer, model M20, stainless steel construction, 20 liter capacity, jacketed chamber rated 6 bar (87 PSI) @ 158 degrees C, with 1.5 KW 230/460 volt main drive, with vented cover and baffled cover, on base with VFD and contr
  6. " Used Littleford mixer, model FM130-D, 304 stainless steel construction, 4.6 cu. ft. total capacity, 2.8 cu. ft.
    working capacity, provision for chopper, no chopper, 10 HP 230/460 volt main drive, manually operated flush type discharge, on stan
  7. " Used model W200/K300 Littleford mixer-cooler combination, with model W200 Littleford high speed mixer, stainless steel construction, pneumatically operated plug valve, pneumatically operated hinged cover, baffle thermowell, on base with 60 HP 208 vo
  8. " Used KM6000 D Littleford mixer, 316L stainless steel construction, 212 cu ft total capacity, 148 cu ft working capacity, rated 5 PSI and full vacuum internal at 331 F 304L stainless steel jacket rated 90 PSI at 331 F, cored shaft with rotary union,
  9. " Used KM6000 D Littleford mixer, 316L stainless steel construction, 212 cu ft total capacity, 148 cu ft working capacity, rated 5 PSI and full vacuum internal, 304 stainless steel jacket rated 90 PSI, provisions of (6) choppers presently set up with
  10. " Used FKM1200E-2Z Littleford mixer, stainless steel construction, 42 cu ft total capacity, 29.4 cu ft working capacity, (2) 10 HP 230/460 volt high speed choppers, jacketed for 75 PSI @ 320 F, standard access doors, (2) 16"", (1) 10"
  11. Used KM300-D (2Z) Littleford mixer, stainless steel construction, 9.9 cu. ft. total capacity, 6 cu.ft. working capacity, (12) 15 HP high speed choppers, (2) bottom liquid injectors, air purge seals, 8"" x 8"" feed port, (1) 8"
  12. " Used Littleford Mixer, Model FKM600D, stainless steel construction, 21.9 cu. ft. total capacity, 12.9 cu. ft. working capacity, standard plow blades, standard feed ports and access doors, manually operated discharge with flush valve, 25 H.P. main dr
  13. " Used Littleford Mixer Model FKM130, 4.6 cu. ft.
    total, 2.8 cu. ft. working capacity, S/S Construction, bolt on plow blades, jacketed for 75 PSI @ 375 degrees F, 5 H.P.
    high speed chopper, 5 H.P. main drive, center bottom outlet with hand
  14. " Used Littleford Mixer, Model FKM300D, stainless steel construction, 11 cu. ft. total capacity, 7.7 cu. ft.
    working capacity, standard plow blades, (1) 8"", (1) 10"" feed ports, (1) 5"" x 6"" center botto
  15. " Used FM130D Littleford mixer, stainless steel construction, 4.6 cu. ft. total capacity 2.8 cu. ft. working capacity, jacketed for 75 PSI @ 320 F, air purge seals, 10 hp 230/460 volt high speed choppers, 10 hp 230/460 volt main drive, standard bolt o
  16. " Used KM300D Littleford mixer, stainless steel construction, 11 cu. ft. total capacity, 7.7 cu. ft. working capacity, jacketed for 75 PSI @ 320 F, with (2) 10 hp 230/460 volt high speed choppers, bolt on paddle style mixers, belt driven with 15 hp 23
  17. " Used Littleford mixer, model FM50D, all atainless steel construction including chamber, jacket, plows, base and stand, 50 liter 1.8 cu. ft. totel capacity, 1.26 cu. ft.
    working capacity, jacketed chamber rated 75 PSI @ 320 F, with 7.5 hp 230/4
  18. " Used Littleford mixer, model FKM600D, 304 stainless steel construction, 21 cu. ft. total capacity, 11 cu. ft. working capacity, (2) 10 HP 230/460 volt XP high speed choppers, jacketed for 75 PSI @ 320 F, internal rated full vacuum @ 320 F, bolt on p
  19. " Used FM130D Littleford mixer, stainless steel construction, 4.6 cu ft total capacity, 2.8 cu ft working capacity, 5 HP 230/460 volt XP high speed chopper, 5 HP 230/460 XP main drive, sanitary welded blow design, 8"" top feed, 4.25"
  20. " Used Littleford Mixer, Model FKM600D, stainless steel construction, 21.9 cu. ft. total capacity, 12.9 cu. ft. working capacity, jacketed chamber rated 75 PSI @ 320 degrees F, air purge seals, standard plows and access doors, 10"" & 8"
  21. " Used Littleford Mixer, Model FKM130, stainless steel construction, 4.6 cu. ft. total, 2.8 cu. ft. working capacity, jacketed for 75 PSI @ 320 degrees F, 10 H.P.
    230/460 volt high speed chopper, 5 H.P. 230/460 volt main drive, air purge seals,
  22. " Used Littleford Mixer, Model FKM600D, stainless steel construction, sanitary design with welded plows, 21.9 cu. ft. total capacity, 12.9 cu. ft. working capacity, standard plows, air purge seals, standard access doors, (2) 5 H.P. 230/460 volt choppe
  23. " Used Littleford Mixer, Model FM-130-D, stainless steel construction, 4.6 cu. ft. total, 2.8 cu. ft. working capacity, jacketed for 75 PSI @ 320 degrees F, 7.5 H.P.
    230/460 volt main drive, provision for high speed chopper less chopper, air pur
  24. " Used FKM2000E Littleford Mixer, stainless steel construction, 73 cu. ft. total capacity, 43 cu. ft. working capacity, provision for 3 choppers, less choppers, Falk gear box rated HP less motor, air purge seals, bolt on plows, standard access door
  25. " Used Model FKM-4000E Littleford Mixer, stainless steel construction, 140 cu. ft. total capacity, 83 cu. ft.
    working capacity, jacketed for 75 PSI @ 320 degrees F, standard access doors, (1) 10"", (3) 3"", (2) 2""
  26. " Used Littleford Mixer, Model KM600D, stainless steel construction, 21.2 cu. ft. total, 11 cu. ft. working capacity, standard plows, jacketed for 90 PSI, air purge seals, end discharge, 20 H.P. main drive.


    Please call (888) 433-5771 o
  27. " Used Littleford Mixer, Model KM600D, stainless steel construction, 21.2 cu. ft. total, 11 cu. ft. working capacity, standard plows, jacketed for 90 PSI, air purge seals, end discharge, 20 H.P. main drive.


    Please call (888) 433-5771 o
  28. " Used Littleford Mixer, Model DVT-130 1Z, stainless steel construction, 4.6 cu. ft. total capacity, 2.8 cu. ft.
    working capacity, vessel rated for 250 PSI and full vacuum internal at 100 degrees F, jacketed vessel and ends rated 150 PSI at 100
  29. " Used Littleford Mixer, Model FM130D (1Z), stainless steel construction, 4.6 cu. ft. total capacity, 2.8 cu. ft.
    working capacity, jacketed for 75 PSI @ 320 degrees F, 5 H.P. 230/460 volt main drive, 5 H.P. 230/460 volt chopper, air purge seals
  30. " Used FKM2000D Littleford Mixer, stainless steel construction, 73.5 cu. ft. total capacity, 42.4 cu. ft.
    working capacity, standard access doors, air purge seals, (4) 5 H.P. 230/460 volt high speed choppers, bolt on plows, 7"" x 9
  31. " Used Littleford Mixer, Model FM-130-D, stainless steel construction, 4.6 cu. ft. total, 2.8 cu. ft. working capacity, 7.5 HP 230/460 volt XP main drive, 10 HP 230/460 volt XP high speed chopper, jacketed for 75 PSI at 220 degrees F, on base, Serial
  32. Used KM8000D Littleford Mixer, stainless steel construction, 283 cu. ft. total capacity, 198 cu. ft.
    working capacity, S/S jacketed for 75 PSI at 100 degrees F, provision for (6) choppers, (6) bottom entering liquid injectors, air purge seals, 18
  33. " Used KM600D Littleford Mixer, stainless steel construction, 21 cu. ft. total capacity, 11 cu. ft. working capacity, stainless steel jacket rated 75 PSI at 320 degrees F, provision for (4) choppers leg choppers, (4) bottom entering liquid injectors,
  34. " Used Littleford Mixer, Model FM-130, stainless steel construction, 4.6 cu. ft. total capacity, 2.8 cu. ft.
    working capacity, jacketed for 75 PSI at 320 degrees F, approx. 10 H.P. high speed chopper, manually operated flush type bottom discharg
  35. " Used Littleford Cooler, Model W2400, stainless steel construction, jacketed for 45 PSI at 290 degrees F, approx.
    shell dimensions 38"" diameter x 135"" long, (4) access doors, with 50 H.P. motor, Serial No. 41040-3648.
  36. " Used Littleford mixer, model FKM1200D, stainless steel construction, 42 cu. ft. total capacity, 29.4 cu. ft.
    working capacity, vessel rated 75 PSI @ 320 F, jacketed for 75 PSI @ 325 F, (4) 5 HP 230/440 volt high speed choppers, 20 HP 220/440 v
  37. " Used Littleford Nauta mixer, model FA7 Mark II, stainless steel construction, 6.9 cu. ft. working capacity, 51 gallons, approx 52"" diameter x 52"" high cone with bolt on dish top, 3 HP 230/460 volt XP main drive with compound ge
  38. " Used Littleford Nauta dryer, model 3.5 Mark II, stainless steel construction, 3.5 cu. ft. working capacity, rated full vacuum @ 353 F internal, jacketed for 125 PSI @ 353 F, approx 39"" diameter x 44"" cone, less motor drive, ser
  39. " Used Littleford Nauta mixer, model FB150, stainless steel construction 150 cu.ft. working capacity, 1125 Gallons approx 112"" diameter x 146"" high cone, with flat bolt on top, rated ATM@ 366 F internal, jacketed for 150 PSI@ 366
  40. " Used Littleford Mixer, Model FM130D, stainless steel construction, 4.6 cu.ft. total capacity, 2.8 cu.ft. working capacity, provision for chopper no chopper, 7.5HP 220/440 Volt main drive, manually operated flush type discharge, on stands, Serial# 42
  41. " Used Littleford high shear granulating mixer, model MGT125, stainless steel product contact surfaces, 125 liter total capacity, 100 working capacity, jacketed for 75 PSI @ 300 F, with chopper, pneumatically operated plug valve discharge, XP design,
  42. " Used 1.4 cu.ft. Littleford Ribbon Blender, Model B-1 , All stainless steel construction, 13"" wide x 16"" long trough, Double ribbon, jacketed trough, outboard roller bearings, sanitary packing glands, 3"" center bottom
  43. " Used Littleford Mixer/Reactor, Model DTV-130, stainless steel construction, 4.6 cu.ft. total capacity, 2.8 cu.ft. working capacity, vessel rated 250 PSI@ 100 F, jacketed vessel and end rated 100 PSI@ 100 F, 10HP 230/460 Volt XP high speed chopper, 1
  44. " Used Littleford Mixer/Reactor, Model DVT-130, stainless steel construction, 4.6 cu.ft. total capacity, 2.8 cu.ft. working capacity, vessel rated 250PSI@ 100F, jacketed vessel and end rated 100PSI@ 100F, 10HP 230/460 Volt XP high speed chopper, 10HP
  45. Used Littleford Lab High Intensity Mixer, Model W-10 stainless steel construction, 10Liter capacity, HP / Volt, side discharge with valve, Serial# 20378-4050

    Please call (888) 433-5771 or email us using the form below.
  46. " Used Littleford Mixer/Reactor, Model DVT-130, stainless steel construction, Cantilevered design 4.6 cu.ft.
    total capacity, 2.8 cu.ft. working capacity, vessel rated 250PSI@ 500F, jacketed vessel and ends rated 100PSI@ 500F, 10HP main drive, 10
  47. " Used Littleford Lodige Lab Mixer, Model M20, stainless steel construction, 20 Liter capacity, jacketed chamber rated 5 Bar@ 158C 1/2HP high speed chopper, 1.5KW main drive, 230/460 Volt, 5""x10"" access door, Machine# 13101 Seria
  48. " Used Littleford high shear granulating mixer, model MGT 70, stainless steel product contact surfaces, 70 liter total capacity, 60 liter working capacity, pneumatically operated plug valve discharge with controls on base, serial# 13387-4543, new 1994
  49. " Used Littleford Mixer, Model KM300-D, stainless steel construction, 11 cu.ft. total capacity, 7.7 cu.ft.
    working capacity, jacketed for 75PSI@ 320F, with (2) 10HP 230/460 Volt high speed choppers, bolt on plows, 15HP 230/460 Volt main drive th
  50. " Used Littleford Lodige Lab Mixer, Model M20, stainless steel construction, 20 Liter capacity, jacketed chamber rated 5 Bar@ 158C, 1.5KW 230/460/ Volt main drive, Machine# 13484, Serial# 4745, New 1994

    Please call (888) 433-5771 or email us
  51. " Used Littleford Lodige Lab Mixer, Model M20, stainless steel construction, 20 Liter capacity, jacketed chamber rated 5 Bar@ 158C, 1.5KW 230/460 Volt main drive, 5""x10"" access door, Serial# 5009

    Please call (888) 433-5
  52. " Used Littleford Lodige Lab Mixer, Model M20, stainless steel construction, 20 Liter capacity jacketed chamber rated 5 Bar@ 158C, 1.5KW 230/460 Volt main drive, 5""x10"" access door, Serial# 5010

    Please call (888) 433-57
  53. " Unused Littleford Lodige Lab Mixer, Model M20MK, stainless steel construction, 20 Liter capacity, jacketed chamber rated 5 Bar@ 158 C, 1.2KW high speed chopper,1.5KW main drive, 230/460 Volt, 5""x10"" access door, Machine# 14490
  54. " Used Model W200/K300 Littleford Mixer-Cooler Combination, with Model W200 Littleford High Speed Mixer, stainless steel construction, pneumatically operated plug valve, hinged cover, with baffle thermowell, on base with 50/25 HP 460 volt motor, Model
  55. " Used Littleford Mixer, Model FM130-D, stainless steel construction, 4.6 cu. ft. total capacity, 2.8 cu. ft.
    working capacity, jacketed for 75 PSI at 320 degrees F, air purge seals 10 H.P. 230/460 volt chopper, 7.5 H.P. 230/460 volt main drive,
  56. " Used VT4000 Littleford Mixer/Dryer, 304 stainless steel construction, 140 cu. ft. total capacity, 83 cu. ft.
    working capacity, rated 15 PSI at 250 degrees F internal, stainless steel jacket rated 75 PSI at 250 degrees F, provision for (4) chop
  57. " KM13500D Littleford Mixer, 316 stainless steel construction, 476 cu. ft. total capacity, 330 cu. ft.
    working capacity, jacketed for 75 PSI, (6) 15 H.P. high speed choppers, air purge seals, 16"" x 24"", 15"" top i
  58. Used 1200 liter Littleford Cooler, Model K1200, stainless steel construction, jacketed for 45 PSIG at 100 degrees F, 20 H.P. 575 volt motor, Serial #40070-2467.


    Please call (888) 433-5771 or email us using the form below.
  59. Used 1200 liter Littleford Cooler, Model K1200, stainless steel construction, jacketed for 45 PSIG at 100 degrees F, 20 H.P. 575 volt motor, Serial #41580-4127.


    Please call (888) 433-5771 or email us using the form below.
  60. " Used FKM600D Littleford Mixer, carbon steel construction, 21.9 cu. ft. total capacity, 12.9 cu. ft.
    working capacity, jacketed chamber rated 75 PSI @ 325 degrees F, air purge seals, standard plows, 14"" X 22"" side access d
  61. " Used KM15000(SZ) Littleford Mixer, 316 stainless steel construction, 530 cu. ft. total capacity, 318 cu. ft.
    working capacity, 316 stainless steel jacket rated 75 PSI @ 320 degrees F, (6) 15 HP 460 Volt high speed choppers with provision for l
  62. " Used Littleford Double Arm Mixer, 3/4 gallon working capacity, all stainless steel construction including machine, bearing housings, base, and control panel, tangential double Nobben Blades, jacketed bowl rated 125 PSI @ 353 degrees F, hydraulic til
  63. Used Littleford Traveling Saw, Model ATS9/24, 24"" diameter blade, approximately 24"" travel, with .73 H.P.
    motor, Serial No. 20222-3468.


    Please call (888) 433-5771 or email us using the form below.
  64. Used FKM4200D Littleford Lodige Mixer, 304 stainless steel construction, 148 cu. ft. total capacity, 86.9 cu. ft.
    working capacity, (4) 7.5 HP 230/460 volt high speed choppers, (4) liquid injection ports, jacketed for 15 PSI @ 250 degrees F, 32
  65. " Used Littleford Mixer, Model FKM 600D, all 304 stainless steel construction including shell, jacket, ends, bearing housings, legs and control panels, sanitary design with welded plow blades, 21.9 cu. ft. total capacity, 12.9 cu. ft. working capacity
  66. " Used FKM8000D Littleford Mixer, carbon steel construction, 283 cu. ft. total capacity, 198 cu. ft.
    working capacity, rated full vacuum internal, jacketed for 75 PSI @ 320 degrees F, (2) 18"" x 24"" access doors, 30"
  67. " Used FKM15000D Littleford Mixer, carbon steel construction, 530 cu. ft. total capacity, 371 cu. ft.
    working capacity, rated full vacuum internal, provision for (6) choppers, less choppers, jacketed for 75 PSI @ 320 degrees F, cooling style plo


How can LabX serve you better? Click here and tell us!


Dec 02, 2008. Copyright © 1995-2008 LabX.com All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.
Use of this Web site constitutes acceptance of the LabX User Agreement.

MNX12 WXX49 DEX2