|
|
|
Heater chamber, all stainless steel construction, unit is designed to warm up inline syrup prior to starting a pumping operation, 8" Tri-Clover top, 4" inline tee, chamber is 8" in diameter ...
|
Ad LV28959194
|
|
|
|
Mild steel tube-in-shell heat exchanger for caustic soda, 3/4" tubes, 1-1/2" NPT steam ports, 6" lye ports, no name plate.
|
Ad LV28959195
|
|
|
|
Marley Series 220 cooling tower, serial number 222 621 5 1403 86, 40HP single fan style, make up water float valve, 19 feet long by 11 feet wide.
|
Ad LV28958898
|
|
|
|
Mueller model AT40 B-20 plate and frame heat exchanger, (64) 18" x 56" plates for 450 square feet of surface area, 125PSI, National Board number 19830, mild steel frame, stainless steel cont ...
|
Ad LV28959183
|
|
|
|
Mueller single pass triple tube heat exchanger, all stainless steel contact and construction, 2" tube in a "U" configuration with a total of 23' of length for approximately 24 square feet of ...
|
Ad LV28959196
|
|
|
|
Stainless steel cooling tunnel, U shaped layout, 6 wide belts, unit consists of 7 wide x 15 tall 24 long section (infeed), 7 wide x 15 tall x 21 radius (u-turn), 7 wide x 15 tall 20 section ...
|
Ad LV28958902
|
|
|
|
Stainless steel tube in shell heat exchanger, 12 square feet of surface area, (52) 1/2" diameter x 21-1/2" long product tubes, 1 diameter inlet and outlet for product, 3/4 diameter inlet and ...
|
Ad LV28959197
|
|
|
|
Supercharger model UX-216-HP-72 stainless steel plate and frame heat exchanger, serial number P24972H, rated to 75psi, 1982, with (72) 16" x 48" stainless steel plates giving the unit 375 sq ...
|
Ad LV28959184
|
|
|
|
TAU Energy model M55-40LL plate and frame heat exchanger, serial number 660411065, 1996, rated 195C, 30psi, 2" fittings (no ferrels), (21) 9.5" wide x 20" long plates for 27 square feet of s ...
|
Ad LV28959185
|
|
|
|
Thermxchanger model 505SF stainless steel tube-in-shell heat exchanger, stainless steel contact and shell, rated 150psi shell and 100psi tube, with (23) 0.5" x 60" tubes, three pass, 15 squa ...
|
Ad LV28959198
|
|
|
|
Stainless steel tube in shell heat exchanger, 12 square feet of surface area, (52) 1/2" diameter x 21-1/2" long product tubes, 1 diameter inlet and outlet for product, 3/4 diameter inlet and ...
|
Ad LV28959199
|
|
|
|
48" long single pass tube-in-shell heat exchanger, (7) .25"x48" tubes, 2 square feet, 3" Tri-Clamp ends, .75" threaded media ports.
|
Ad LV28959200
|
|
|
|
Votator two-barrel swept surface heat exchanger, each barrel measures 6" x 72" long with 9 square feet of heating surface area, nickel chrome barrels, 2" Tri-Clover fittings, separate 7 1/2 ...
|
Ad LV28959187
|
|
|
|
Votator sweep surface heat exchangers, 2 each 6 x 72, 9 square feet of surface area, 3 Tri-Clover ports, concentric mutators, dual 15 HP gearhead direct drive, stainless steel contact, mild ...
|
Ad LV28959188
|
|
|
|
Waukesha Cherry-Burrell tube in tube spiral heat exchanger, serial number 39631, built in 2000, 4" Tri-Clover infeed and discharge for product, 3" Tri-Clover steam infeed and discharge, with ...
|
Ad LV28959201
|
|
|
|
Weigman and Rose tube and shell heat exchanger for water, serial number 13314, 2 pass with 5/8 tubes, 8 product inlet, 2 product discharge,4 and 2 medium ports, 13 long, insulated.
|
Ad LV28959202
|
|
|
|
MODEL EI-50 SUPERPLATE HEAT EXCHANGER, SERIAL #59-2790. THIS IS A 2 STAGE STAINLESS STEEL HEAT EXCHANGER. ONE STAGE HAS 11 PLATES AND THE 2nd STAGE HAS 15 PLATES FOR A TOTALSURFACE AREA OF A ...
|
Ad LV28501493
|
|
|
|
Heat Exchanger
|
Ad LV28501494
|
|
|
|
Heat Exchanger, oil based
|
Ad LV28501495
|
|
|
|
One used Kearney Graphite Block Type Heat Exchanger, Approximate 10 Square Feet. Graphite contact areas. Process and service sides rated 75 psi at 360 degrees F. (2) 1-1/2", and (2) 4" openi ...
|
Ad LV28501497
|
|