|
|
|
FMC model 200 finisher, four paddle rotor assembly currently installed with stainless steel paddles, 3" Tri-Clover pipe infeed, 1/8" round hole perferated screen, stainless steel catch pan w ...
|
Ad LV28959503
|
|
|
|
|
FMC model 200 pulper finisher, four paddle rotor assembly currently installed with brushes, 1/8" round hole perforated screen, stainless steel catch pan, 10 HP belt drive, all stainless stee ...
|
Ad LV28959504
|
|
|
|
|
FMC model 50 pulper, 3 Tri-Clover pipe infeed, with four paddles, stainless steel and brass contact, mild steel frame, with guards, requires drive, no serial number, cleaned and painted.
|
Ad LV28959505
|
|
|
|
|
Garlic cracker, all stainless steel construction, 5 HP gearhead motor, 10" by 11" inlet, two spare new rotors.
|
Ad LV28959161
|
|
|
|
|
Garroutte 48" wide by 40 feet long hydrostatic belt blancher, straight wire belt with 3/32" slots, all stainless steel construction, 5 HP power pack, hydraulic hood lift and belt drive, floo ...
|
Ad LV28958559
|
|
|
|
|
Garroutte flooded wash tank and incline elevator, 48" wide thermoplastic chain with 1/4" by 1" drain slots, 7 foot discharge height, all stainless steel construction, tank is 90" long 48" wi ...
|
Ad LV28958560
|
|
|
|
|
General Machinery hydrauflaker, stainless steel frame, with drive and hydraulics.
|
Ad LV28959373
|
|
|
|
|
Hobart model 5700D meat saw, all stainless steel, 24 x 16 sliding feed table, 10 high cutting area, 18 x 21 finished product table, 3hp 220/440 drive, serial number 27-047-475, with spare bl ...
|
Ad LV28959374
|
|
|
|
|
In-line product magnet, all stainless steel construction, easy access removable clean out, 3" flange fittings, check valve, requires cover clamp.
|
Ad LV28959364
|
|
|
|
|
Knife honer, 1/4 HP.
|
Ad LV28959206
|
|
|
|
|
L Piereder meat pump, model HST - 175, serial number 164, 42" diameter vacuum hopper, 30" tall, feeds into pumping chamber, requires discharge parts.
|
Ad LV28959375
|
|
|
|
|
Langsenkamp model 57A finisher, serial number B-312, 1995, 1-1/2 Tri Clover infeed, e-z adjust mechanism, 3 bottom discharge to 40 gallon product holding tank, 10 HP belt drive, 230/460/3/60 ...
|
Ad LV28959506
|
|
|
|
|
Manzini screens, 7 each 0.045.
|
Ad LV28959508
|
|
|
|
|
Manzini Screens, 8 each 0.033".
|
Ad LV28959507
|
|
|
|
|
Manzini TE-30, serial number 34936, built in 1994, 40 HP/ 1771 RPM, direct motor, 4" I-line infeed, 4" I-line discharge, requires paddle, cage, and endplate.
|
Ad LV28959510
|
|
|
|
|
Manzini model TE-30 turbo pulper finisher, all stainless steel contact, 30 HP motor, requires cage and paddles, multiple screen sizes available.
|
Ad LV28959509
|
|
|
|
|
Manzini TE-30 turbo pulper, serial number 33387, year 1991, 4 inlet/ discharge, 40 HP direct drive, mild steel frame, requires cage, paddles, paddle adjusters.
|
Ad LV28959511
|
|
|
|
|
Meisei Reinetsu Kogyo cabinet steamer / blancher, all stainless steel, 40" wide x 40" deep x 52" tall, with steam headers and controls.
|
Ad LV28958564
|
|
|
|
|
P & L Specialties grape dumping station, model number PL-RH-25-24, serial number 202184-F, built in March 2003, 24 diameter UHMW capped stainless steel screw, 29 long, 44 tall infeed height, ...
|
Ad LV28959167
|
|
|
|
|
P & L Specialties grape dumping station, model number PL-RH-25-24, serial number 2021-4 , built in March 2003, 24 diameter UHMW capped stainless steel screw, 29 long, 44 tall infeed height, ...
|
Ad LV28959166
|
|
Liquid-Sampler - single hand operation
Liquid-Sampler for single hand operation. The valve is ope... Read More
DipSampler - for liquids
Made of PP for rapid and simple spot checks of liquids. The dip samplers... Read More
New Union ProcessTwin Q-50 Attritors for Food Industry
Union Process, a manufacturer of grinding ... Read More
Follow us on Twitter