Beckman Allegra 6 Centrifuge

Maximum Speed

6,100 RPM (3,750 RPM with included rotor)

Maximum Capacity

4 x 750ml

Timer

30 Minutes

Features

Smart Balance Technology ensures accurate performance with automatic imbalance detection and shutdown for safety.

Features an electromechanical door-locking mechanism with a secondary manual lock, enhancing operator safety.

Monitors rotor load during operation, automatically shutting down in case of severe imbalance.

Equipped with a rugged drive and fine-tuned suspension for consistent performance and reliability in the lab.

Two independent monitoring systems prevent door opening when the rotor is spinning, ensuring enhanced lab safety.

Includes anchoring provisions to secure the centrifuge, minimizing risk of injury or damage in case of rotor issues.

The Beckman Allegra 6 Centrifuge features smart balance technology and has a high capacity with the GH-3.8 swing bucket rotor. This benchtop centrifuge and its rotor can accommodate a wide range of vessels, from 1.5 ml tubes to 750 ml bottles and generally including tubes, bottles, microplates, specialty bottles, and blood bags. The Allegra 6 reaches maximum speeds up to 6,100 RPM with maximum RCF of 5,710 x g. Features automatic rotor imbalance detection, auto door interlock, rugged drive, and fine-tuned suspension for performance, reliability, and safety in the lab.

The Allegra 6 is ideal for cell culture, plasma, and other general purpose separations.

All of our equipment is fully tested to perform at factory specifications before being shipped.

Please confirm this rotor meets your application needs and request a different rotor, if necessary. Available rotors can be found in our Rotor Compatibility Guide.

INCLUDED:

The Beckman Coulter Allegra 6 Centrifuge includes:

> GH-3.8 Swing Bucket Rotor and Buckets

> 1 Set of 15ml Adapters

> 1 Set of 50ml Adapters

> Power Cord

> Operator's Manual

> NIST Centrifuge Calibration and Preventative Maintenance Report

> Full 180 Day Parts and Labor Warranty

Beckman Allegra 6 Centrifuge Specifications

Maximum speed (RPM) :	6,100 RPM (3,750 RPM with included rotor)
Maximum capacity :	4 x 750ml
Run time :	0 – 30 minute, hold timer
Driver :	Direct drive with replacement brushes
Accel/Decel rates :	1 / 3
Maximum noise output :	< 60 dB
Dimensions (W x D x H) :	21.5 x 26 x 15.5 in
Weight :	114 lbs
Refrigeration:	No Refrigeration

Preventative Maintenance Performed on The Beckman Coulter Allegra 6 Centrifuge

Door Latch Assembly Checked for Full Function

Door Hinges are Checked and Lubed as Needed

Drive Belt is Checked for Rips and Tears and Replaced if Needed

Rotors and O-rings are Lubed as Needed

Lamps and Display are Checked and Replaced if Dim

Line Cord is Checked Signs of Fray or Damage and Replaced Accordingly

Internal Circuitry is Checked for Faulty/Shorted Components and Replaced Accordingly

Beckman Allegra 6 Centrifuge Manual

Click Here to View all the Technical Specs for the Allegra 6R

Centrifuge Inspection and Recertification Checklist

Confirm the power supply output voltages match specified requirements for stable distribution to all internal components

Measure and verify voltages at PCB test points to ensure accurate power delivery and circuit integrity

Confirm rotor compatibility with the centrifuge model and check that rotor detection systems recognize the rotor type

Inspect the exterior for any cosmetic or structural damage that could affect performance or safety

Check the door mechanism alignment to ensure secure and smooth opening and closing

Inspect and replace the gas strut with an OEM part to maintain proper door support and safety

Examine the rotor chamber bowl for dents or damage and replace as needed to ensure safe operation

Replace and confirm full functionality of all lid lock switches to maintain secure closure

Inspect and lubricate the door lock mechanism, applying grease to the lid lock rail for smooth operation

Test compressor functionality (if applicable) to ensure proper operation and consistent temperature control

Conduct an 8-12 hour cycle test to validate consistent performance over prolonged use

Confirm rotor motor stability, check for unusual noise, and assess mechanical integrity during operation

Inspect the condensation drain and clear any clogs to prevent moisture buildup in the rotor chamber

Verify RPM accuracy using an NIST-traceable tachometer and perform calibration as necessary

Check the centrifuge error log to ensure zero recorded issues, confirming system reliability

Technician Inspection and Recertification Checklist: Centrifuges

The Following Checklist Is to Be Performed on All Incoming and Outgoing Pieces of Equipment

Task:	Completed?:	Remarks?
Confirm power supply output voltages match specified requirements:	Completed:
Measure and verify voltages at PCB test points for accuracy:	Completed:
Confirm rotor compatibility and detection for proper identification:	Completed:
Inspect exterior for cosmetic or structural damage:	Completed:
Check door mechanism alignment for secure opening and closing:	Completed:
Inspect and replace gas strut with OEM part as needed:	Completed:
Examine rotor chamber for dents or damage and replace if necessary:	Completed:
Replace and confirm functionality of all lid lock switches:	Completed:
Lubricate door lock mechanism and lid lock rail for smooth operation:	Completed:
Test compressor (if applicable) for proper operation and cooling:	Completed:
Run 8-12 hour cycle test to ensure consistent performance:	Completed:
Check rotor motor for stability, noise, and integrity:	Completed:
Inspect and clear condensation drain to prevent buildup:	Completed:
Verify RPM accuracy with NIST traceable tachometer and calibrate:	Completed:
Check centrifuge error log for zero recorded issues:	Completed:

To View More of Our Recertification Protocol Click Here

Typically Ships Within: 1 to 2 Business Days

Beckman Coulter Allegra X-30 Series

Filter By

Price Range

Listing Type

Condition

Category

Manufacturer

Become a member and enjoy exclusive benefits