Nabertherm Air Circulation Chamber Furnaces, Electrically Heated Also for Debinding in Air and under Protective Gases NEW

"Chamber furnaces with air circulation are characterized particularly by their very good temperature uniformity. As a result, they are well suited for processes such as calcination and drying e.g. ceramic materials. The design as a debinding furnace for safe debinding in air or in an inert atmosphere is possible. When used for debinding in air the exhaust gases are diluted by fresh air to reliably prevent an inflammatory atmosphere in the furnace chamber. For debinding processes that have to take place under inert gas, the IDB passive safety concept with a residual oxygen content of max. 3 % is recommended." (Nabertherm)

Tmax 450 °C, 650 °C, or 850 °C
Stainless steel air-baffles in the furnace for optimum air circulation
Swing door hinged on the right side
Base frame included in the delivery, N 15/65 HA designed as table-top model
Horizontal air circulation
Temperature uniformity up to +/- 5 °C according to DIN 17052-1 (model N 15/65 HA up to +/- 7 °C)
Optimum air distribution enabled by high flow speeds
One removable tray and rails for two additional trays included in the scope of delivery (N 15/65 HA without removable tray)
Defined application within the constraints of the operating instructions
NTLog Basic for Nabertherm Controller: Recording of process data with USB-flash drive (NA 30/45 - N 675/85 HA)

Additional equipment (not for model N 15/65HA)

Optimization of the temperature uniformity up to +/- 3 °C according to DIN 17052-1
Fan cooling to accelerate the cooling process
Motor driven exhaust air flaps
Manual lift door (up to model N(A) 250/.. (HA))
Pneumatic lift door
Adjustable air circulation for sensitive components
Additional removable trays
Roller conveyor in furnace chamber for heavy charges
Designed for Tmax 950 °C
Debinding packages with safety concept starting from 120 liters volume, see page 6 - 8
Process control and documentation via VCD software package or Nabertherm Control Center (NCC) for monitoring, documentation and control

Model	Tmax	Inner dimensions in mm			Volume	Outer dimensions in mm			Heating	Electrical	Weight
	°C	w	d	h	in l	W	D	H	power in kW2	connection*	in kg
NA 30/45	450	290	420	260	30	1040	1290	1385	3.0	1-phase	195
NA 60/45	450	350	500	350	60	1100	1370	1475	6.0	3-phase	240
NA 120/45	450	450	600	450	120	1200	1470	1575	9.0	3-phase	310
NA 250/45	450	600	750	600	250	1350	1650	1725	12.0	3-phase	610
NA 500/45	450	750	1000	750	500	1500	1850	1800	18.0	3-phase	1030
NA 675/45	450	750	1200	750	675	1500	2050	1800	24.0	3-phase	1350

N 15/65 HA	650	295	340	170	15	470	845	460	2.4	1-phase	55
N 30/65 HA	650	290	420	260	30	607 + 255	1175	1315	5.5	3-phase1	195
N 60/65 HA	650	350	500	350	60	667 + 255	1250	1400	9.0	3-phase	240
N 120/65 HA	650	450	600	450	120	767 + 255	1350	1500	13.0	3-phase	310
N 250/65 HA	650	600	750	600	250	1002 + 255	1636	1860	20.0	3-phase	610
N 500/65 HA	650	750	1000	750	500	1152 + 255	1886	2010	30.0	3-phase	1030
N 675/65 HA	650	750	1200	750	675	1152 + 255	2100	2010	30.0	3-phase	1350

N 30/85 HA	850	290	420	260	30	607 + 255	1175	1315	5.5	3-phase1	195
N 60/85 HA	850	350	500	350	60	667 + 255	1250	1400	9.0	3-phase	240
N 120/85 HA	850	450	600	450	120	767 + 255	1350	1500	13.0	3-phase	310
N 250/85 HA	850	600	750	600	250	1002 + 255	1636	1860	20.0	3-phase	610
N 500/85 HA	850	750	1000	750	500	1152 + 255	1886	2010	30.0	3-phase	1030
N 675/85 HA	850	750	1200	750	675	1152 + 255	2100	2010	30.0	3-phase	1350

Dupont Instruments

Filter By

Price Range

Listing Type

Condition

Category

Manufacturer

Become a member and enjoy exclusive benefits