Thermo Scientific Napco 8000 DH CO2 Incubator w/ Sterilization Cycle

Temperature Range

Ambient +5°C to 50°C

CO2 Range

0 to 20%

Interior Volume

6.5 cu ft. (184L)

Features

Precision CO2 control with ±0.1% accuracy for stable culturing conditions

Thermal conductivity sensor ensures consistent temperature monitoring

Automatic high-temperature decontamination cycle for reliable sterilization

100% HEPA filtration system maintains Class 100 air quality for contamination control

Independent temperature safety sensor with audible and visual alarms for enhanced protection

Durable Type 304 stainless steel interior with a shiny finish for easy cleaning

Four-sided molded magnetic Santoprene door gasket ensures a secure seal

Direct heat design with uniform airflow for optimal environmental stability

The Thermo Scientific Napco 8000 DH CO2 Incubator w/ Sterilization Cycle combines precise CO2 and temperature control with automatic sterilization cycle technology to offer superior stability for cell culture parameters. The Napco 8000 DH CO2 Incubator, with its pinpoint CO2 and temperature control, elevated RH, and use of a thermal conductivity sensor, is an excellent choice for many applications. These incubators feature unsurpassed temperature stability and superior parameter recovery characteristics, with innovative continuous contamination control technology. The Napco 8000's 100% HEPA filtration quickly achieves Class 100 air quality. The HEPA filter entraps particulate air contaminants and prevents their escape, and filter efficiency increases as particulates and micro-organisms are entrapped. The direct heat design of this incubator allows for directed airflow and direct chamber heating to maintain optimum uniformity for an ideal culturing environment.

Temperature retention and quick recovery are especially important for researchers working with critical cell cultures. The Thermo Scientific Napco 8000 DH CO2 Incubator provides maximum thermal protection and quick recovery from swings in ambient temperature and power variations. This incubator also features an automatic high-temperature decontamination cycle, which is ideal for overnight sterilization and ensures consistent sterilization time after time.

All of our equipment is fully tested to perform at factory specifications before being shipped..

INCLUDED:

The Thermo Scientific Napco 8000 DH CO2 Incubator w/ Sterilization Cycle includes:

> 3 Shelves

> Drain Tray

> New HEPA Filter

> Calibration and Preventative Maintenance Report

> Power Cord

> Operator's Manual

> Full 180 Day Parts and Labor Warranty

Thermo Scientific Napco 8000 DH CO2 Incubator w/ Sterilization Cycle Specifications

Temperature: :
Control :	± 0.1°C
Temperature Range :	Ambient +5°C to 50°C
Temperature Uniformity :	± 0.3°C at 37°C
Tracking Alarm :	User programmable low indicator
CO2: :
CO2 Control :	± 0.1%
CO2 Range:	0-20%
Inlet Pressure :	15 PSIG (1.034 bar)
CO2 Sensor:	T/C
Readability :	0.1%
Tracking Alarm :	User programmable
Humidity: :
RH :	Ambient to 95% at 37C
Humidity Pan :	Natural vaporization
Optional Display :	Displays in 1% increments
Inlet Pressure: :
Maximum Per Channel :	40.8 sq ft.
Standard Maximum :	4,17
Temperature Safety: :
Sensor :	Thermostat, independent of temperature control system
Type :	Extreme temperature safety, action, and indicator
Indicator :	Message center, audible and visual alarms
Construction::
Interior Volume :	6.5 cu ft. (184L)
Interior :	Type 304 stainless steel shiny finish
Exterior :	18 gauge cold roll steel
Outlet Door Gasket :	Four-sided molded, magnetic santoprene
Interior Door Gasket :	Bulb, silicone

Incubator Inspection and Recertification Checklist

Inspect the display for any dim, flickering, or dead pixels, replacing any affected areas to maintain full readability and operational clarity

Thoroughly examine external regulators for any signs of damage, wear, or malfunction (if applicable), replacing any compromised parts

Inspect temperature, CO₂, and H₂O sensors (if applicable), ensuring each sensor is functioning correctly and accurately reporting conditions

Conduct a detailed inspection of all internal wiring for frays, tears, or breakages; replace any compromised wires to ensure safe and reliable connections

Verify that software settings align with the internal components and calibration specifications, adjusting configurations as needed for accurate operation

Inspect and clean the fan, ensuring it is free from dust or obstructions; replace if performance is below required standards

Examine wheels and leveling mounts for structural integrity, ensuring proper balance and stability for safe operation

Inspect door gaskets and latches for any signs of wear or damage, replacing if necessary to maintain a secure seal and optimal environmental control

Calibrate temperature accuracy at 37°C using a NIST-traceable probe, confirming it meets required tolerances

Calibrate CO₂ level to 5% using a Fyrite combustion test kit (if applicable), ensuring precise atmospheric conditions

Monitor temperature and CO₂ stability over a 24-hour period, verifying consistent operation within specified ranges

Conduct a thorough cosmetic inspection to confirm all external surfaces and components meet quality standards, free from visible damage or wear

Technician Inspection and Recertification Checklist: Incubator

The Following Checklist Is to Be Performed on All Incoming and Outgoing Pieces of Equipment

Task:	Completed?:	Remarks?
Inspect display for dim, flickering, or dead pixels; replace for readability:	Completed:
Examine external regulators for damage or malfunction; replace compromised parts:	Completed:
Inspect temperature, CO₂, and H₂O sensors for correct function and accuracy:	Completed:
Inspect internal wiring for frays, tears, or breakages; replace compromised wires:	Completed:
Verify software settings align with components and calibration specs; adjust if needed:	Completed:
Clean fan and remove dust/obstructions; replace if performance is substandard:	Completed:
Examine wheels and leveling mounts for structural integrity and balance:	Completed:
Inspect door gaskets and latches for wear or damage; replace to maintain seal:	Completed:
Calibrate temperature at 37°C with NIST-traceable probe to confirm accuracy:	Completed:
Calibrate CO₂ level to 5% with Fyrite test kit for atmospheric precision:	Completed:
Monitor temperature and CO₂ stability over 24-hour period to verify consistency:	Completed:
Conduct cosmetic inspection to confirm quality of external surfaces and components:	Completed:

To View More of Our Recertification Protocol Click Here

Downloads

Technical Specification Download

Operator's Manual Download

Typically Ships Within: 1 to 3 Business Days

Thermo Scientific SterileMax

Filter By

Price Range

Listing Type

Condition

Category

Manufacturer

Become a member and enjoy exclusive benefits